meta-raspberrypi

Yocto BSP layer for the Raspberry Pi boards - http://www.raspberrypi.org/.

https://yocto-ci.resin.io/job/meta-raspberrypi1/badge/iconBuild Status https://yocto-ci.resin.io/job/meta-raspberrypi2/badge/iconBuild Status https://yocto-ci.resin.io/job/meta-raspberrypi3/badge/iconBuild Status https://img.shields.io/matrix/meta-raspberrypi:cub.icu.svg?server_fqdn=matrix.cub.icuMatrix

Description

This is the general hardware specific BSP overlay for the RaspberryPi device.

More information can be found at: http://www.raspberrypi.org/ (Official Site)

The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:

  • Distro-less (only with OE-Core).
  • Angstrom.
  • Yocto/Poky (main focus of testing).

Dependencies

This layer depends on:

  • URI: git://git.yoctoproject.org/poky
    • branch: master
    • revision: HEAD
  • URI: git://git.openembedded.org/meta-openembedded
    • layers: meta-oe, meta-multimedia, meta-networking, meta-python
    • branch: master
    • revision: HEAD

Quick Start

  1. source poky/oe-init-build-env rpi-build
  2. Add this layer to bblayers.conf and the dependencies above
  3. Set MACHINE in local.conf to one of the supported boards
  4. bitbake core-image-base
  5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
  6. Boot your RPI.

Maintainers

  • Andrei Gherzan <andrei at gherzan.ro>